FDM Printing process: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

20 November 2023

  • curprev 14:0514:05, 20 November 2023 Jesse talk contribs 1,558 bytes +1,558 Created page with "The 3D printing process works by building up layer upon layer of molten plastic to create an object. As each layer sets, the next layer is printed on top and the object is built up. In the example shown down below, the filament holder is loaded with a filament spool. The filament is fed through the drive and the Bowden tube to the hot end where it melts and is extruded through the hole in the nozzle onto the shape that the printer builds. The width of the filament..." Tag: Visual edit
Retrieved from "https://wiki.fablabenschede.nl/FDM_Printing_process"