FDM Fixing a clogged nozzle: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

22 November 2023

  • curprev 12:2312:23, 22 November 2023 Jesse talk contribs 879 bytes +41 No edit summary Tag: Visual edit
  • curprev 12:2212:22, 22 November 2023 Jesse talk contribs 838 bytes +838 Created page with "Fixing can be done by burning off all the material that is stuck inside, to do this firstly go to a well ventilated place since this will produce some smoke. Get a blow torch and turn the flame fairly low, now get a small cup with water and put this below the flame of the torch, get some plier to hold the nozzle and hold this in front of the flame, rotating regularly. After a 10 to 30 seconds a molten piece of plastic should fall out into the cup of water. If u can see t..." Tag: Visual edit
Retrieved from "https://wiki.fablabenschede.nl/FDM_Fixing_a_clogged_nozzle"