UV Service menu

From Fablab Wiki
Jump to navigation Jump to search

IMPORTANT Do not make any changes unless you really know what you're doing!

Follow this procedure to get into the service menu:

  1. Make sure the printer is turned off
  2. Press rapidly after each other: Arrow Down - Right - Left - Up - Right - Down - Left. Then press and hold Arrow Left, Down and Right. While holding these buttons down, press the power button
  3. You should see "Service mode" appear on the LCD screen
Retrieved from "https://wiki.fablabenschede.nl/index.php?title=UV_Service_menu&oldid=842"