FDM Export to carrier

Follow this step by step guide on how to export your code:

1. Insert the SD card or USB stick from the printer into your PC.
2. Start Cura and open your model in Cura.
3. Select the correct material profile.
4. Click on the Slice button on the bottom right.
5. Click on preview and ensure you are satisfied with the print (Screenshot 6).
6. Ensure overhangs are properly supported.
7. Check for any weird artifacts visible in the model.
8. Click on “Save to Removable Drive” to save the print to your SD card.
9. Click on “Eject” on the pop-up message.

You can now safely remove the SD card. Watch the video “Ultimaker Tutorial” for a more detailed print preparation explanation.

   < 2/5 >